Select Page
automatic filter f490

The self-cleaning Automatic Filter F490 is pneumatically operated and used for the separation of solids in various different media like seawater, river water or process water. The Filter ensures reliable and continuous filtration in a variety of applications like cooling water cycles or water treatment plants. The filter can operate at very low pressures of only ≥ 0,7 bar and is characterized by an unmatched low backflush rate, a compact design and near maintenance-free operation.
The revolutionary MULTI X design utilizes the advanced Multi-Bernoulli cleaning technology. This technology was invented by Georg Schünemann and combines multiple strainers in one filter housing.

Reliable filtration by using the Bernoulli principle

GRADE OF FILTRATION
The MULTI X ensures the safe protection of our customer’s applications with a consistently high filtration quality down to 40 μm. The proven Multi-Bernoulli technology warrants a continues and effective filtration even at low operating pressures starting from only 0.7 bar.

BACKFLUSH RATE
The innovative multi-strainer design allows exceptionally low backflush rates. Less than 1% of the total volume flow are possible and underline the unmatched efficiency of the MULTI X. While maximizing the clean water flow the waste water flow is reduced to a minimum. Possible costs for the storage or disposal of the backflush can be reduced significantly.

COMPACT DESIGN
With its smart and modular design, the MULTI X offers a considerably smaller footprint saving up to 40% of space compared to conventional filter solutions. This compact design based on smaller and standardized components, reduces the required maintenance space and efforts significantly. The flanges are arranged in-line to ensure an easy piping integration without any height offset.

In- / outlet
DN100 – DN800 (DIN, ANSI)
Housing Material
GGG-40
1.4581
1.4557
Design pressure
10 bar
Volume flow
50 to 8000 m3/h
Strainer insert
Slot wedge wire strainer
Basket strainer
Grade of filtration
≥ 40 µm (Slot wedge wire)
≥ 1 mm (basket)
Design code and guidelines
AD2000/ EN13445
ASME VIII Div.1
PED/ EAC
FILTRATION CYCLE (BERNOULLI PRINZIPLE)

Bernoulli‘s principle states that an increase in the speed of a fluid occurs simultaneously with a decrease in static pressure. Georg Schünemann has perfected the utilization of the Bernoulli principle for automatic filters over decades. The distinguishing feature of this filter is the flushing disc, which enables an efficient and contactless cleaning. The cleaning process is completely automatic and requires no manual intervention.

FILTRATION


During normal filtration, particles accumulate from top to bottom on the inside of the strainer.
Cleaning begins automatically according to a timed cycle, or after a high differential pressure signal.

PRE-FLUSHING

During the pre-flushing phase, the flushing valve opens and particularly larger particles are flushed out.

CLEAINING


The flow velocity increases locally around the disc within the gap between the flushing disc and the strainer. Simultaneously the static pressure is reduced in accordance with the Bernoulli Principle and the direction of the flow is reversed which releases the particles from the surface of the strainer basket.

The released particles are flushed out from the filter via the flushing outlet. Finally, the flushing valve is closed.

The filtration will not be interrupted during the entire cleaning cycle.

Downloads

BROSCHURE F490

Animation

GEORG SCHÜNEMANN GMBH

BUNTENTORSDEICH 1

28201 BREMEN

info@sab-bremen.de

Tel.: +49(0)421-5 59 09-0

Fax: +49(0)421-5 59 09-40

SPONSORSHIP

 

 

WordPress Cookie Notice by Real Cookie Banner